|
| KIT
INCLUDES: |
• (3) LED Fixed SLIM 12v (Low Voltage) Puck Lights.
• (3) Can be Recessed (flush) or Surface mounted.
• (3) 12V- Low Voltage 1 Watt LED Bulbs (one LED bulb inside each SLIM Puck Light.), in your choice of Cool white or Warm white. Each LED bulb provides an output equivalent to 18 Watts, but draw only 1 Watt!
• (1) UL Listed Transformer/Harness with Cord & Plug end.
• (2) Mounting Screws for transformer.
• (12") Double Sided Tape.
NOT
RATED FOR DIRECT CONTACT WITH INSULATION |
Close Up |
 |
Specifications |
• SLIM Fixed Puck Lights: Comes with (3) LED SLIM Puck Lights with 3 torsion clips for recessed (flush) mounting applications. Torsion clips can be removed for surface mounting applications or can be left on for Surface mounting. These SLIM Lights are fixed (do NOT move).
• Material: All metal
• Diffuser: Comes with frosted tempered glass lens diffuser.
• Voltage / Wattage: 12V Low Voltage System. Each LED Puck Light is 1 Watt, total of 3 Watts for entire Kit. • Bulbs: Comes with (3) 1 Watt LED Bulbs pre-installed in each SLIM Light, in your choice of Cool White (5800 Kelvin) ---with 68 lumens or Warm White (2800 Kelvin) with 52 lumens. Each of these LED bulbs provide an output --equivalent to 18 Watts!!, but each draw only 1 Watt!.
• Reflector: Built in polished mirror type reflector helps increase light output while helping to dissipate heat.
• Location: NOT rated
for direct contact with insulation.
• Transformer/Harness: Comes
with UL Listed 12V LED Low Voltage transformer that plugs in to a 120V receptacle. The Harness has 3 Inputs that allow you to simply plug each of your SLIM Lights into it!
|
Dimensions |
Dimensions/sizes and specifications are subject to change without notice. We
try our best
to keep dimensions/sizes
accurate but
it is not always
possible. If
EXACT dimensions/sizes
are a necessity
for your application
we highly recommend
consulting with
us before purchasing.
We also strongly
suggest that
you please carefully
read our entire
terms of sale
posted on this
website before
purchasing. |
|
How it Works |
These LED SLIM Puck Light KITS are designed to be surface mounted or recessed mounted. This KIT allows you to do either application. See below images which will give you a better idea of how easy this versatile KIT is to install for either surface mounting or recessed mounting applications. Great for undercabinet lighting, shelf lighting, up lighting, cove lighting, task lighting... simply use your imagination.
|
| How it Works when Surface mounting |
| If you plan to surface mount, simply remove the 3 torsion clips and use double side tape (included) to mount. NOTE: You do NOT have to remove the clips to Surface Mount them. NOT rated for direct contact with insulation. |
 |
|
|
| How it Works when Recessed mounting |
| If you plan to recess (flush) mount, insert the LED Puck Light into the hole where they will be mounted using the 3 pre-attached torsion clips. Simply hold in all 3 torsion clips as you insert the SLIM Light in the hole. Once in the hole the torsion clips will essentially hold the unit in place. NOT rated
for direct contact with insulation. |
|
|
