|
 |
AIR TIGHT Rated
Rated
for direct contact with insulation.
Commercial Grade Includes Name Brand HPF Electronic Multi-Use Ballast for 120V or 277V
6" 26W Fluorescent New Work Housing
|
 |
Good for ceilings with insulation.
This housing is for NEW construction jobs where there is NO existing drywall or you may be able to
use for existing drywall ONLY if you have enough access or crawlspace to be able to install this
housing.
This unique housing
is Air Tight rated. It is still IC rated* but it is also Air Tight sealed in key engineer specified
areas. One of the benefits of having this IC rated Air Tight housing is that it saves you money on your
electrical bill by reducing your heating and air conditioning costs because it eliminates the escaping
heat or conditioned air that normally escapes through non-Air Tight fixtures. No matter what State you
live in this housing will save you money and increase your property's value by the simple fact that you
have made your property more energy efficient.
Whether you live in the central, the east or west side of the USA, this housing is the future of all
housings. Not only will it save you money and increase your property value, it will also help decrease
the ever growing problem of the depletion of our planets natural resources and reliance on foreign fuel
and its rising cost.
CHPCEA
- Uses
ONE 26 Watt QUAD PL (4 Pin) bulb
-
Rated for
direct contact with insulation
- Comes
with Adjustable Bar Hangers
- Comes
with 4 Nails (1 at the end of each bar hanger)
- Comes with brand name HPF Electronic Multi-Use Ballast that allows for 120 Volt or 277 Volt operation. 120v is standard in all homes, 277v is common in commercial buildings. Please confirm your commercial application uses 120v or 277v as some do rarely use 208v or 240v.
- Can
operate in 120v or 277v
- Auto
Reset
-
THERMALLY PROTECTED
- UL listed Air Tight, "IC" Rated for direct contact with insulation, UL listed
damp location and UL listed feed through.
-
HEIGHT: 7½" -Ceiling Opening 6 3/8"
Click
here to see TRIMS for this housing! |
 |
Trims that will
work with the above housing
 |
| C4F1 |
Single Bulb
Reflector |
|
 |
|
|
 |
| CF50 |
Single Bulb
WallWash |
|
|
|
|
 |
| CF54 |
Single Bulb
Baffle/Ref. |
|
|
|
|
 |
| C440 |
Fresnal
|
|
|
|
| For any recessed housings that
are received damaged, customers must ship them back at their own expense before we can supply a
replacement. Customers must also pay for return shipment of the replacements. This is because of the
very low profit margin on these items. Damages on recessed housings rarely occur, but when it does,
most of the time it can be hammered out. Though, if they are beyond repair, the above
applies. |
|
* IC stands for Insulation Contact meaning the
housing is approved to make direct contact with insulation.
|
| Commercial grade fluorescent recessed downlighting saves energy and conforms to certain state codes and requirements and can be used for residential as well as commercial since its multi-use commercial grade ballast allows for 120 Volt, which is standard in all homes, as well as 277 Volt which is common in most commercial buildings. Please confirm that your commercial application uses 120v or 277v as some rarely use 208 Volt or 240 Volt. Fluorescent commercial grade recessed is recommended for California Title 24 and other states code such as Colorado and Washington. Plus, many more states are now starting to require fluorescent recessed lighting. This particular commercial grade can is IC Rated and Air Tight as well and gives you 26 Watts of fluorescent light. |
|
