| BODY CONSTRUCTION & FINISH OPTIONS |
| Material |
Metal Baffle Construction Powder Coated in the white with white outer ring. |
Baffle
Finishes |
Click a
finish to
enlarge: |
 |
Available in White Only. |
|
 Our Powder Coating provides the ultimate protection for your trim. Click here for details of our powder coating. Unlike other imitation trims, our trims will not discolor from the heat of the bulb. Remember the imitations have limitations! |
| BULBS / VOLTAGE SPECIFICATIONS |
| 120v Incand. |
Uses Incandescent "R30 / R40" Reflectors bulbs. Max Wattage: 75 watt |
| 120v Halogen |
Uses Halogen "PAR30" Capsylite bulbs. Max Wattage: 75 watt |
| 120v LED |
Uses 1.5 Watts (Equals 15 Watts of Light Output) 120v LED PAR30 Bulb |
| You'll be asked to choose a bulb wattage & style when ordering. We HIGHLY recommend clicking here for Bulb Details BEFORE buying this trim. |
| SPECIFICATIONS & EXCLUSIVE FEATURES |
| Dimensions |
Size: 7" Overall Diameter |
Housings
for this Trim |
If buying our Housings with this Trim, Click Here OR
If you already have existing housings, Click Here.
**IMPORTANT NOTE: Based on this trim's height (which is what makes it an Air Tight Trim), this trim can NOT be used with the following Shallow Housings with the part numbers: #CH5T, #CH5RICT, #CH5RT, #CH5ICTA OR any other manufacturer's SHALLOW Housing. |
| Air Tight |
Trim tapers all the way up to socket area causing an air tight effect. Air-tight trims are great for the following reasons: a) Complies with the California Title 24 Requirements AND your state's local Air Tight / Air Flow Energy Conservation Requirements because it eliminates loss of air flow saving you money in your electrical, heating and air conditioning; b) aesthetics, basically this trim looks much better after the bulb is installed because there is no gap around the bulb which is common with non-air-tight trims; c) Saves you money in labor when installing more that one trim in the same project. Why? Because all bulbs will always be at the exact same height and position. This is impossible with other trims that do not have the snap to socket design. With these others trims, you will have to manually adjust every single bulb to ensure a uniform look. This alone accounts for about an extra 5 to 10 minutes per trim that you will be saving. This particular trim's design allows you to NOT be able to remove it should you need to. If you're looking for a similar air-tight trim that is removable, click here. |
| Socket Input |
Snap to Socket design - Click here for details |
| Listing |
Our trim comes with UL approval to interchange with other brand housings. Beware of trims that are not approved. |
| Warranty |
Lifetime Guarantee not to rust, corrode or discolor (click here for details) |
| MOUNTING SPECIFICATIONS |
| Hardware |
Simply snap the socket into the top of trim then push trim in to the housing. All done. Notice the mounting clips on top of the trim. These clips make this a one time install non-removable trim. This trim is designed as a quick install trim by the use of "push & lock" torsion clips located on the top of the trim. THE GOOD NEWS: You do NOT have take out this trim to replace the bulb. The bulb easily comes out from the bottom without ever having to take out this trim! In all honesty we have rarely heard of any one ever changing trims ..have you? So there is no reason to ever have to remove this trim. So while supplies last, for only $1.69 or $1.89 shipped free, you can have an airtight trim! |
| Warning |
We highly suggest you click here for an Important Installation Note |
| EXCLUSIVE OPTIONS |
Firestopping
Cover |
Click Here for our Firestopping Recessed Light Enclosure |
| Accessories |
Click Here for our Recessed Accessories Index |
