| BULBS /
VOLTAGE
SPECIFICATIONS |
| 120v Incand. |
Uses Incandescent "R30 / R40" Reflectors bulbs. Max Wattage: 75 watt |
| 120v Halogen |
Uses Halogen "PAR30" Capsylite bulbs. Max Wattage: 75 watt |
| 120v LED |
Uses 1.5 Watts (Equals 15 Watts of Light Output) 120v LED PAR30 Bulb |
| You'll be asked to choose a bulb wattage
&
style when ordering. We HIGHLY recommend clicking here for Bulb
Details BEFORE buying this trim. |
| SPECIFICATIONS & EXCLUSIVE FEATURES |
| Dimensions |
Size: 7" Overall Diameter |
Housings
for this Trim |
If buying our Housings with this Trim, Click Here OR
If you already have existing housings, Click Here.
**IMPORTANT NOTE: Based on this trim's height (which is what makes it an Air Tight Trim), this trim can NOT be used with the following Shallow Housings with the part numbers: #CH5T, #CH5RICT, #CH5RT, #CH5ICTA OR any other manufacturer's SHALLOW Housing. |
| Air
Tight |
This trim comes with a built-on non-removable matching chrome metal outer ring. It tapers all the way up to socket area causing an air tight effect. Air-tight trims are great for the following reasons: a) Complies
with the Energy Department's Title 24 Requirements and Energy Conservation Requirements because it
eliminates loss of air flow saving you money in your electrical, heating and air conditioning; b)
aesthetics, basically this trim looks much better after the bulb is installed because there is no gap
around the bulb which is common with non-air-tight trims; c) Saves you money in labor when
installing more that one trim in the same project. Why? Because all bulbs will always be at the exact
same height and position. This is impossible with other trims that do not have the snap to socket
design. With these others trims, you will have to manually adjust every single bulb to ensure a
uniform look. This alone accounts for about an extra 5 to 10 minutes per trim that you will be saving.
This particular trim's design allows you to be able to remove it should you need to. If you're looking
for a lower priced air-tight trim that is non-removable, click
here. |
| Socket Input |
Snap to Socket design |
| Warranty |
Lifetime Guarantee not to rust, corrode or
discolor
(click here for details) |
| BODY CONSTRUCTION
& FINISH OPTIONS |
| Material |
Metal Cone Reflector in Chrome with matching non-removable Chrome metal outer ring |
| MOUNTING
SPECIFICATIONS |
| Hardware |
Simply snap the socket into the top of trim then push
trim in to the housing. All done. Notice the top of this socket entry way has a gasket making this a
better airtight trim. Also the side "rabbit ear" clips allow for easy install and easy removal
of this trim. |
| Warning |
We
highly suggest you click here for an Important Installation Note |
| EXCLUSIVE OPTIONS |
Firestopping
Cover |
Click Here for our Firestopping Recessed Light
Enclosure |
| Accessories |
Click Here for our Recessed Accessories
Index |
