Shown above with Clear Style Cover with WaterSlide™ Clear Tempered Glass Lens attached
Shown above with Grill Style Cover with WaterSlide™ Clear Tempered Glass Lens attached

Reminder: You get both the Clear Style Cover and the Grill Style Cover upon purchasing this PGAU999 Fixture at no extra cost.




With PAR20 Bulb
Above shows the tilt capability of this
fixture when using a PAR20 bulb.


When using a PAR20 Bulb: Adjustable up to 25° degrees left and right tilt and adjustable
1 1/4 inches up and down.


With PAR30 Bulb
Above shows the tilt capability of this
fixture when using a PAR30 bulb.


When using a PAR30 Bulb: Adjustable up to 15° degrees left and right tilt and adjustable
1 1/4 inches up and down.


With PAR38 Bulb
Above shows that when using this
fixture with a PAR38 bulb, there is
virtually no tilt capability.

When using a PAR38 Bulb: Adjustable up to 2° degrees left and right tilt and is
NOT adjustable up and down.




Reflector

Our built in LightEcho™ polished specular mirror reflector increases light output & dissipates heat from wiring compartment.

 



Our exclusive WaterSlide™ is important because with the flat lens water will collect and cause calcium build up. Now add the 480° heat from the bulb and now you are basically "baking" in the water causing the calcium to become impossible to remove! This will significantly reduce your light output and increase the heat build up inside your fixture which will decrease your bulb and socket life. When you buy this light you will have less worries because the curved shape of our WaterSlide™ glass will help reduce this water/calcium build up by causing the water to "slide" off. Remember: What good is a spot/flood light if your reducing almost half of your light output? For complete glass protection we suggest using our Rain-X and Invisa-Shield.

 

How to setup the PGAU999

What you get:

  1. (1) PGAU999 Fixture
  2. (1) Clear Style Cover
  3. (1) Grill Style Cover
  4. (1) WaterSlide™ Curved Clear Tempered Glass Lens
  5. (1) Spare WaterSlide™ Curved Clear Tempered Glass Lens*
  6. (1) Glass Lens Gasket
  7. (1) Spare Glass Lens Gasket
  8. (1) Cover Gasket
  9. (8) Screws
  10. (1) Feed Through Bushing Kit

1. Putting pieces together

- The Clear Style Cover or Grill Style Cover with the cover gasket.
- The WaterSlide™ Curved Clear Tempered Glass Lens with a glass lens gasket.

2. Setting the Tilting angle and/or adjusting up & down

Remove bulb housing from the PGAU999 Fixture, insert the bulb of your choice and follow the steps below:

Up & Down:
Move up or down the screws on each side of the socket, then screw BOTH screws to ensure the bulb won't move.

Please note that PAR38 bulbs cannot move up.

Tilting:
Tilt left or right the side screws then screw the screws on BOTH sides to ensure the bulb won't move.

Please not that you have a 25 degree angle using a PAR20 & a 15 degree angle using a PAR30. Only a 2 degree angle using a PAR38.

3. Finishing setup

Put back the housing bulb into the PGAU999 Fixture and make sure the pins fit in the slots.

You can now put the WaterSlide™ Curved Tempered Glass Lens (Gasket must be fit around the glass lens ) on top of the fixture and add the cover (Clear Style Cover or Grill Style Cover) of your choice (Gasket must be fit inside the cover that you will use).

You should have 8 screws in a small plastic bag however you will only need to use 6 in order to screw the cover on the fixture.

 


CONGRATULATIONS, YOU'RE DONE


*Because we are not charging for the spare glass, in the event that you receive ONE of the glass broken, we will not be responsible to replace it.
As again we have already provided you with a spare in case of breakage.

Home |Terms and Conditions | Privacy Policy © 1999-2012, Affordable Quality Lighting Inc. All Rights Reserved.
Any unauthorized duplication or attempted duplication in full or in part of any content from this
website is strictly prohibited and will be prosecuted to the fullest extent permitted by law.
Sale Items - Telephone - Email - Live Chat - About Us - Why Buy From Us? - Our Lights In Action
Please Help us to Improve: Click Here to Rate Us.

Click Here to Close This Window