| Solumina Installation Instructions | |
| The following instructions demonstrate how to easily install your Solumina lights. | |
|
|
|
| Step #1: Mark center of swingpost arm or top of standard sign using a tape measure and marker. |
|
|
|
|
| Step #2: Peel off plastic cover from double sided tape on back of mount. |
|
|
|
|
| Step #3: Center the middle hole of the plastic mount with the center mark on swingpost or sign. Press mount firmly to attach double-sided tape to sign. |
|
|
|
|
| Step #4: Drill all three holes with provided 5/32" drill bit as shown. |
|
|
|
|
| Step #5: Insert the two outer screws with provided screwdriver. |
|
|
|
|
| Step #6: Attach light by sliding into mount as shown. |
 
|
|
|
|
| Step #7: To secure light from theft, screw in center bolt with provided screwdriver. When you need to remove the light, unscrew the center bolt and detach. The mount will stay attached to the sign. |
|
Click Here to Close Window